Bhuleshwar, Mumbai, Maharashtra
GST No. 27ALEPC8831A1ZJ
Call 08046035275 91% Response Rate
We are recognized in the industry for trading and supplying an extensive range of Copper and Brass Industrial Rods. These rods are exclusively designed for ensuring safety of road constructions. Our reliable vendors conduct the entire production process in strict compliance with the industry standards and norms. Further, we are tested these roads with the help of our skilled quality inspectors. In addition to this, these products are highly demanded across the nations, owing to their qualitative features like cost effectiveness and are delivered in a timely manner. Also, these roads are tolerated at industry leading prices.
Length | 1 - 12 mtr |
Material | Brass |
Shape | Flat |
Surface Treatment | Mill Polished |
View Complete details
Cu Content | 59 % |
Diameter | 8 - 120 mm |
Length | 2 - 6 mtr |
Shape | Hexagonal |
View Complete details
Lengths | 1 mtr |
Material | Brass |
Outer diameter | 10 mm - 100 mm |
Shape | Hexagonal |
View Complete details
Diameter | Up to 800 mm |
Shape | Round |
Length | Up to 8 mtr |
Cu Content | 59 % |
View Complete details
Purity | 99.9 % |
Length | 1 - 12 mtr |
Diameter | 3 mm - 300 mm |
Shape | Round |
View Complete details
Material | Copper |
Diameter | 12 - 160 mm |
Length | Up to 6400 mm |
Cu Content | 97.75 % |
Alloy Or Not | Is Alloy |
We are a company which is well known in the market for the supply and the manufacture of a wide range of products such as the Copper Hex Bar which is available in a range of sizes, shapes, designs and they have been priced at very reasonable rates in the market. These rods are made using a high quality of metals which have been designed using the best technology available in the market and they are used for a wide range of applications in the market.
View Complete details
Diameter | 1.5 mm - 300 mm |
Length | 100 mm - 5500 mm |
Shape | Round |
Hardness | 1/16 hard, 1/8 hard |
View Complete details
Cu content | 99.9 % |
Diameter | 6 mm - 250 mm |
Shape | Round |
Thickness | 0.3 - 200 mm |
Size mm | Tensile Strength Kg/mm2 Min | % Elongation on 5.65 A min |
40887 | 26.5 | 12 |
45992 | 26.5 | 18 |
OVER - 25 | 23.5 | 22 |
View Complete details
Shape | Bar |
Size | 6 mm - 120 mm |
Cu content | 99.9 % |
Material | Copper |
Physical Properties: (1/2 Hard)
Size mm | Tensile Strength Kg/mm2 Min | % Elongation on 5.65 A min |
40887 | 26.5 | 12 |
45992 | 26.5 | 18 |
OVER - 25 | 23.5 | 22 |
Electrical Conductivity at 20oC | 99.25% I.A.C.S. |
View Complete details
Length | 100 - 1500 mm |
Material | Brass |
Size | 5 - 160 mm |
Surface Treatment | Polished, Bright |
View Complete details
Length | 2,000 mm |
Width | 12 - 32 mm |
Thickness | 0.8 - 1 mm |
Material | Copper Wire |
View Complete details
Size | 2 - 5 mm |
Material | Copper |
Length | 300 mm - 500 mm |
Operating Temperature | 800 Degree C |
View Complete details
Size | 2.4 mm |
Material | Bronze |
Length | 200 - 1000 mm |
Operating Temperature | 710 - 800 Degree C |
View Complete details
Minimum Order Quantity: 110 Kilogram
Cu Content | 59.0-63.0 % |
Diameter | 1.5 mm - 120 mm |
Length | 3.6 mtr |
Material | Brass |
Shape | Round |
View Complete details
Size | 2 mm |
Material | Copper |
View Complete details
Diameter | 1.3 mm - 2.7 mm |
Purity | 99 % |
Shape | Round |
Material | Copper |
Length | 500 mm |
View Complete details
Composition | Copper 56-59, Lead 2 - 3.50 %, Iron 0.35%, Total Imp 0.70% |
Diameter | 4 mm - 150 mm |
Length | 100 mm - 6000 mm |
Material | Brass |
Shape | Round |
We are leading supplier of Brass Round Bars. Brass Round Bars are available in options of a wide range of alloys and in different material finishes.
Application Areas:
Free Cutting Brass:
IS-319 GR.I / GR.II | Alloy C360 | EN 12167 CW614N | JIS H3250 C3601 |
BS-2874 CZ121 | ASTM B16 C36000 | DIN CuZn39Pb3 | JIS H3602 BE /BD |
Alloy 385IS-319 | EN 12164 CW614N | MS 58 | JIS H3250 C3604 |
View Complete details
Material Grade | Cuzn37 |
Diameter | 1 - 800 mm |
Cu Content | 99.9 % |
Length | 2, 3, 5.8, 6mtr |
Surface Treatment | Mill, polished |
Alloy | Cu | Zn | Pb | Al | Fe | Ni | Sn | DER(Mn,Si,Sb,As,Bi) |
Number | % | % | max. % | max. % | ||||
CW508L | 62 - 64 | REST | 0,01 | 0,03 | 0,01 | 0,30 | 0,10 | 0,10 |
View Complete details
Width | 5 mm - 350 mm |
Thickness | 1 mm - 60 mm |
Edge Length | Up to 6400 mm |
Overall cutting tolerance | Up to 100 mm |
Copper content | 99.99 % |
View Complete details
Material | Brass |
Shape | Round, Square |
Type | Brass |
Customisation | Customised |
Is It Customized | Customized |
View Complete details
Color | REDDISH |
Brand | MMC |
Diameter | 0.05 mm, 0.07 mm, 0.10 mm, 0.12 mm, 0.127 mm, 0.15 mm |
Material | Copper |
Type | Bare |
Surface Treatment | Polished |
Additional Information:
View Complete details
Minimum Order Quantity: 5 Kilogram
Diameter | 0.02 - 1 mm |
Wire Gauge | 31 SWG - 45 SWG |
Shape | Round |
Conductor Type | Stranded |
Insulation Type | Bare |
Usage/Application | Electrical Appliance |
Material | Tinned & bare Copper Wire |
Cross Section | 1.5 mm to 50 mm diameter |
Width | 5 mm - 100 mm |
Thickness | 1 mm - 15 mm |
We have ready stock of Braided Copper Wire.
Multiple strands of soft drawn bright annealed copper wire are bunched together & then braided into round hollow after that these round braids are pressed immediately on same machines to get desired width & thickness. As these products are highly flexible same cross section can be maintained by changing size or design of the braided product. Copper wire is selected for making these braids by understanding flexibility & affordability of unique customer. These flexible copper wire braided products are manufactured for the diverse application like; Copper Flexible Connectors, Motor Brush leads, Circuit Breaker shunts, Flexible bus bars, Jointing Kits, Air Break Switches, De-soldering Braids, Television Sets & Ground Strap for Flexible Earthing Solution & so on.
View Complete details
Material | Copper |
Diameter | 12 mm, 14.1 mm, 17.2 mm, 19 mm, 15 mm |
Length | 6 ft, 10 ft |
Tensile Strength | 600 N/mm2 |
We have a wide range of Copper Bonded Earth Rod for our clients. The products offered by us are available at the most affordable rates to our clients. These products are manufactured using the high-grade raw material as per the set international standards. The Earth rod offered by us are made keeping in mind the needs and requirements of our clients. These UL listed copper bonded rod are quality checked on various parameters by our professionals so as to ensure that the products offered by us are defect free.
Listed below are the main features of these products:
View Complete details
Color | wine Colour |
Diameter | 4 - 50 mm |
Gauge | 1 - 20 mm |
Material | Copper |
View Complete details
Minimum Order Quantity: 100 Kilogram
Material | Bronze Alloy |
Shape | ROUND BAR & FLAT BAR |
Brand | INDIAN & IMPORTED MAKE |
Size | 6 MM TO 500 MM DIAMETER |
Nickel Aluminum Bronze
CuAl10Ni5Fe4 / CuAl10Ni5Fe3
An American nickel aluminium bronze where its unique combined properties of high strength, good fatigue, excellent corrosion resistance in sea water, non sparking and wear properties makes it a popular choice across the whole spectrum of industry.
It has very high anti galling properties when running against most grades of steels and is used on a world basis for aerospace landing gear bushes and bearings where its strength, fatigue, wear properties, shock resistance and corrosion resistance are well proven.
CompositionElement | Cu | Al | Ni+Co | Fe | Mn | Si | Sn | Zn |
---|---|---|---|---|---|---|---|---|
% | Bal | 9.0-11.0 | 4.0-5.5 | 2.0-4.0 | 1.5max | 0.25max | 0.2max | 0.3max |
Form | Size Range | Yield 0.2% | UTS | Elong % | Hardness (HB) | |||
---|---|---|---|---|---|---|---|---|
Metric | Imperial | MPa | Ksi | MPa | Ksi | % | (HB) | |
020 | 75-300mm dia | 3- 12” dia | 300-350 | 43.5-50.7 | 600-700 | 87-101 | 12-21 | 180-240 |
HR50 | 50-80 mm dia | 2.0- 3.2” dia | 380-430 | 62.3-62.3 | 725-800 | 105-116 | 10-15 | 180-240 |
TQ50 | 80-130 mm dia | 3.2 – 5.1” dia | 320- 400 | 46.4-58.0 | 620-770 | 90-111.7 | 15-20 | 180-240 |
020 –Hot forged and annealed, HR50 Drawn and Stress relieved (High Strength) TQ50 Quench hardened and temper annealed.
Copper Alloys Manufacturing RangesWith very little limitation on size, C63000 is available as standard in rod, bar, blocks, rings, tubes and discs up to a piece weight of 4,500kg/9,900lbs.
Copper Alloys is also regularly making customised shaped forgings and can increase piece weight up to 20,000kg/44,000lbs.
Copper Alloys Ltd also offers finished machined components in all alloys, complete project management and tailored mechanical properties beyond those of the specification to meet special requirements.
All information is supplied for guidance only and gives no guarantee for end applications.
Typical Physical Properties(In Tension)Imperial | Metric | |
---|---|---|
Density | 0.274lb/in³ @ 68º F | 7580 kg/m³ @ 20ºC |
Specific Gravity | 7.58 | 7.58 |
Specific Heat | 0.090 Btu/lb º F @68º F | 376.7 J/kg ºC @20 ºC |
Electrical Conductivity | 7% IACS @ 68º F | 0.041mega Siemens/cm @20 ºC |
Thermal Conductivity | 22.6 Btu.ft(hr.ft² º F) @68º F | 0.391W/cm ºC @20 ºC |
Thermal Expansion | 9.0 x10ˉ 6 per º F (68-572 º F ) | 15.5 x10ˉ 6 perºC (20-300 ºC) |
Electrical Resistivity | 116Ω-cmil/ft @ 68º F | 19.28 µ Ω-cm@20 ºC |
Relative Magnetic Permeability | 1.4µ | |
Machining Index | 20 (Based on free machining brass 100%) | |
Modulus of Rigidity | 6800ksi | 46884MPa |
Modulus of Elasticity | 18200ksi | 125484MPa |
View Complete details
Length | 1 m ~ 12 mtr |
Diameter | 3 mm ~ 800 mm |
Surface Treatment | Bright, Mill Polishing |
Shape | Round |
View Complete details
Material | Copper |
Form | Flat Bar |
Technique | Hot Rolled |
We have a huge stock of Copper Anode which is used for melting purpose for chemicals & many other uses.
We offer best quality copper anode/Ingots(99.9%) purity which is been utilized in imitation and electroplating purpose.
Application:
View Complete details
Diameter | 2 - 800 mm |
Shape | Square |
Cu Content | 99.9 % |
Length | 12 mtr |
Surface Treatment | Mill, Polished, Bright, Hair Line, Brush, |
View Complete details
Minimum Order Quantity: 3 Kilogram
Beryllium Copper | IMPORTED |
Material | 2%BERYLLIUM |
Impurity | 0.5 % |
Electrical Conductivity | 15-60 (% IACS) |
Grade | C17200 |
Cu Content | 97 % |
Softened Temperature | 315 - 495 Degree C |
Elements | Chemistry % | |||
Copper Alloy UNS C17200 | ||||
C17000 | C17200 | C17300 | ||
Be | 1.60-1.79 | 1.80-2.00 | 1.80-2.00 | |
Ni Co,≥ | 0.2 | 0.2 | 0.2 | |
Ni Co Fe,≤ | 0.6 | 0.6 | 0.6 | |
Al,≤ | 0.2 | 0.2 | 0.2 | |
Si,≤ | 0.2 | 0.2 | 0.2 | |
Pb | / | / | 0.20-0.60 | |
Cu | Remainder | Remainder | Remainder |
Condition code | Diameter or Parallel Plane Spacing | Tensile Strength | Yield Strength, Mpa | Rockwell Hardness | Minimum elongation | |
Typical | Previous | in(mm) | Ksi(Mpa) | B gauge | In, 4*DA, % | |
TB00 | Solid solution Heat Treatment (A) | Many sizes | 410-590 | 140 | 45-85 | 20 |
TD04 | Hard State (H) | ≤10 | 660-900 | 520 | 88-103 | 8 |
>10-25 | 620-860 | 520 | 88-102 | 8 | ||
>25-75 | 590-830 | 520 | 88-101 | 8 |
Additional Information:
View Complete details
Minimum Order Quantity: 100 Kg
Alloy Composition | C95400 |
Grade | ALUMINUM BRONZE |
Type | Rods |
Material | Bronze |
Brand | INDIAN & IMPORTED MAKE |
Product Type | Rod |
Concast Metal Products Co. manufactures C95400 Aluminum Bronze as a standard-stocked item in over 125 sizes of tubes and solids. Rectangles are also available.
C954 is also known in the following related terms: 954, C954 Bronze, 954 Bronze, CDA95400 Bronze, Aluminum Bronze Bar, Nickel Aluminum Bronze, 9C Bronze, 9C Aluminum Bronze, Aluminum Bronze Rounds, Aluminum Bronze Tubes, Aluminum Bronze Rectangles, Heat-Treated Aluminum Bronze.
Other descriptives include: CDA 954, CDA 95400, ASTM B-148-9C, ASTM B-271 Alloy C95400, ASTM B271-C954, ASTM B505 Alloy C95400, ASTM B-584 Alloy C95400, ASTM B-763, SAE J461, SAE J462, QQB-671 Class 3, QQC-390 Alloy G5, QQC-390 Rev. A/B Alloy C95400, MIL-B-16033 Class 3, Mil C-15345-13, WCI 175, WCI 275, AMS 4870B, 4872B, Ingot 415, CC331G, AB1, CuAL10Fe3.
C954 is known for its excellent corrosion resistance to numerous environments, thermal conductivity, wear resistance, moderate to high strength, strength retention at elevated temperatures, good machinability, appearance, and toughness.
Cu% | Fe% | Ni%1 | Al% | Mn% | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Chemical Composition according to ASTM B505/B505M-18 1Ni value includes Co.Note: Cu + Sum of Named Elements, 99.5% min. Single values, unless otherwise noted, represent maximums. | |||||||||||
83.00 min | 3.00- 5.00 | 1.50 | 10.0- 11.50 | 0.50 |
Copper Alloy UNS No. | Machinability Rating | Density (lb/cu in at 68° F) |
---|---|---|
C95400 | 60 | 0.269 |
Mechanical Properties according to ASTM B505/B505M-18 | |||||||||||
Tensile Strength (min) | Yield Strength (at .5% extension under load min) | Elongation (in 2in. or 50mm min, %) | Brinell Hardness (typical Bhn - 3000kg) | Remarks | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Ksi | MPa | Ksi | MPa | ||||||||
85 | 586 | 32 | 221 | 12 | 170 (3000 kg) |
US Customary | Metric | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Physical Properties provided by CDA* As Cast, Field Strength 16 kA/m ** TQ 50 Temper, Field Strength 16 kA/m | |||||||||||
Melting Point - Liquidus | 1900° F | 1038° C | |||||||||
Melting Point - Solidus | 1880° F | 1027° C | |||||||||
Density | 0.269 lb/in3 at 68° F | 7.45 gm/cm3 at 20° C | |||||||||
Specific Gravity | 7.45 | 7.45 | |||||||||
Electrical Conductivity | 13% IACS | 0.075 MegaSiemens/cm at 20° C | |||||||||
Thermal Conductivity | 33.9 Btu · ft/(hr · ft2 · °F) at 68° F | 58.7 W/m at 20° C | |||||||||
Coefficient of Thermal Expansion | 9 · 10-6 per °F (68°-572° F) | 15.5 · 10-6 per °C (20°-300° C) | |||||||||
Specific Heat Capacity | 0.1 Btu/lb/°F at 68° F | 419 J/kg at 293° C | |||||||||
Modulus of Elasticity in Tension | 15500 ksi | 107000 MPa | |||||||||
Magnetic Permeability* | 1.27 | 1.27 | |||||||||
Magnetic Permeability** | 1.20 | 1.20 |
View Complete details
Material | Nickel / Nickel Alloy |
Operating Current | AC/DC |
Country of origin | Made in India |
Diameter | 0.8 mm - 1.6 mm |
Melting Point | 1038 -1054 Degree C |
Nickel Aluminum Bronze Welding Rod is used for MIG and TIG welding of the cast and wrought nickel-aluminium bronze parts such as ship propellers, where high resistance to corrosion, erosion and cavitations in salt or brackish water is required. Nickel-Aluminum Bronze is a very popular filler metal in offshore technology for such items as sea-water desalting, shipbuilding and repair. Also used in the power plant and chemical industry for pumps and tube systems. Helium may be preferred when TIG welding on Al-bronzes that has 300°F maximum interpass recommendations.
View Complete details
Material | Brass |
Rod Length | 100 mm - 6000 mm |
Diameter | 4 mm - 150 mm |
Standard & Material | ASTM,BS,En,JIS,DIN,ISO |
We are one of the leading supplier & exporter of Brass Rod.
Brass Round Bars are available in options of a wide range of alloys and in different material finishes.
Application Areas:
View Complete details