Approx. Rs 10,000 / KilogramGet Latest PriceProduct Details:
|Diameter||Up to 300 mm|
|Length||Up to 2000 mm|
|Usage||Construction , Manufacturing|
|Size/Diameter||2 inch, 3 inch, 1 inch|
Molybdenum Rod, a refractory metal is widely used as an alloying element. Due to its good thermal and electrical conductivity, high melting point and excellent strength at elevated temperatures, molybdenum can be used for various applications in its pure form. In addition, molybdenum has low thermal expansion coefficient. It has to be protected by a suitable coating to withstand temperatures above 500°C under an oxidizing environment.
The following table shows the chemical composition of molybdenum.
|Density||10.3 g/cm³||0.369 lb/in³|
|Tensile strength (annealed)||324 MPa||47000 psi|
|Shear strength (torsional strain rate 0.25/s)||500 MPa||72500 psi|
|Compressive yield strength (0.01% yield)||400 MPa||58000 psi|
|Modulus of elasticity||330 GPa||47900 ksi|
|Modulus of elasticity at elevated temperature (@2000°C/3630°F)||160 GPa||23200 ksi|
|Poissons ratio (calculated)||0.38||0.38|
|Hardness, Brinell (converted from Vickers for 3000 kg load/10 mm ball Brinell test. annealed)||225||225|
|Hardness, Rockwell A (converted from Vickers. annealed)||60||60|
|Hardness, Rockwell B (converted from Vickers. annealed)||98||98|
|Hardness, Rockwell C (converted from Vickers. annealed)||19||19|
|Hardness, Vickers (annealed)||230||230|
|Thermal expansion coefficient (@20°C/68°F)||5.35 µm/m°C||2.97 µin/in°F|
|Thermal conductivity||138 W/mK||958 BTU in/hr.ft².°F|
Molybdenum can be efficiently formed while bending in a transverse direction or against rolling or grain direction. The workpiece can be heated before forming to avoid cracking.
Molybdenum can be welded using electron beam methods and other resistance methods in helium or argon atmosphere.
Annealing of molybdenum can be performed at 1149°C (2100°F).
The following are the major applications of molybdenum:
Approx. Rs 1,000 / KilogramGet Latest PriceProduct Details:
|Thickness||0.5 - 80 mm|
|Outside Diameter||1200 mm|
Nitronic-50 Alloy Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco Nitronic-50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless sheets of steel, Nitronic-50 does not become magnetic when cold worked.
Approx. Rs 200 / KilogramGet Latest PriceProduct Details:
|Melting point||1400-1440 Degree C|
|Composition||Carbon 0.070, Chromium 15.00-17.50, Copper 3.00-5.00, Nickel 3.00-5.00, Phosphorus 0.040, Sulfur .03|
17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by the temperature range in the heat treatment process.
Below you will find typical applications of 17-4 PH stainless steel as well as the metals composition and mechanical properties. Learn more about our value added services that we offer to help you expedite the current job you have at hand.
Best Stainless offers high-quality standards including UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.
17-4 PH stainless steel can be used for a variety of applications including pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, Columbian tantalum, copper, manganese, nickel, phosphorous, silicon, and sulphur.
|Material Type||Condition||Ultimate Tensile Strength (PSI)||0.2% Yield Strength (PSI)||Elongation (% In 2in.)||Reduction Of Area (%)||Hardness Brinell||Hardness Rockwell|
|H1150-D||125000||105000||16||50||255 min - 311 max||C24 - 33|
Approx. Rs 250 / KilogramGet Latest PriceProduct Details:
|Composition||Carbon 0.05, Manganese 0.10, Silicon 0.10, Chromium 12.25-13.25, Nickel 7.50-8.50|
|Tensile strength||1620 MPa|
13-8 MO has good fabrication characteristics, making it ideal for the following common applications:
Altemp Alloys offers 13-8 MO Stainless Steel (PH13-8 MO UNS S13800) in:
Approx. Rs 300 / KilogramGet Latest PriceProduct Details:
|Diameter||3 - 800 mm|
|Technique||Hot Rolled, Cold Rolled|
|Composition||Carbon 0.09, Chromium 16-18, Silicon 1, Nickel 6.50-7.75, Aluminum 0.75-1.50, Sulfur 0.030|
17-7 PH Stainless Steel is suitable for use in fresh water and industrial atmospheres, and mild chemical and oxidizing environments. It is recommended that 17-7 PH should not be used in salt water or reducing environments.
Explore More Products